Differences

This shows you the differences between two versions of the page.

--- install:macos [2021/03/24 12:50] – [Install polymake on Mac OS] paffenholz
+++ install:macos [2024/04/11 16:57] (current) – [Install dependencies with Homebrew] paffenholz
@@ Line 1: / Line 1: @@
 ===== Install polymake on Mac OS =====
-The latest release 4.3 should work on all Mac OS versions greater or equal to 10.14. The installation requires a couple of steps (of which you have maybe done some already for other reasons):
+The latest release 4.9 should work on all Mac OS versions greater or equal to 11. The installation requires a couple of steps (of which you have maybe done some already for other reasons):
   * Install the xcode command line tools
-  * (for some versions) install SDK headers
   * install Homebrew
   * install Perlbrew
@@ Line 19: / Line 18: @@
 In the terminal type
 <code>xcode-select --install</code>
-Either this tells you that your command line tools are installed or opens a small window that asks you whether you want to install them. Confirm. It also offers to install the full XCode IDE. This is **not** neccessary and **not** recommended (you then need to install the command line tools on top from whithin XCode).
+Either this tells you that your command line tools are installed or opens a small window that asks you whether you want to install them. Confirm. It also offers to install the full XCode IDE. This is **not** necessary and **not** recommended (you then need to install the command line tools on top from within XCode).
-On MacOS **10.14** you may need an additional step. Run
+==== Install Homebrew ====
-<code>ls /System/Library/Perl/5.18/darwin-thread-multi-2level/CORE/EXTERN.h</code>
-If that returns a //File not found// error then run
+Installation instructions are [[https://brew.sh/|here]]. In most cases it should be sufficient to copy and execute the first code line on that page into your terminal, that is:
-<code>sudo installer -pkg /Library/Developer/CommandLineTools/Packages/macOS_SDK_headers_for_macOS_10.14.pkg -allowUntrusted -target /</code>
-This will ask for your password. You need to be an administrator of your Mac to run this command. If this fails, then run
-<code>
-softwareupdate -l
-softwareupdate -i "Command Line Tools (macOS Mojave version 10.14) for Xcode-10.3"
-</code>
-where you may need to replace the string in the second command to the one that looks similar in the return of the first command. Then repeat the previous installer command. It should now succeed.
-On **10.15**, you should do
 <code>
-export CPATH=/Library/Developer/CommandLineTools/SDKs/MacOSX10.15.sdk/System/Library/Perl/5.18/darwin-thread-multi-2level/CORE/
+/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
 </code>
-and do all following steps in this terminal (or repeat the export command, if you open a new one).
-==== Install Homebrew ====
-Installation instructions are [[https://brew.sh/|here]]. In most cases it should be sufficient to copy and execute the first code line on that page into your terminal. Make sure you copy the whole line!
 ==== Install Perlbrew ====
-Installation instructions are  [[https://perlbrew.pl/|here]]. In most cases it should be sufficient to copy and execute the first code line on that page into your terminal. Make sure you copy the whole line!
+Installation instructions are  [[https://perlbrew.pl/|here]]. In most cases it should be sufficient to copy and execute the first code line on that page into your terminal, that is:
-Now add some paths to your Terminal config and reload the config. For versions prior to 10.15 do
 <code>
-echo "export PERL5LIB=$HOME/perl5/lib/perl5:$HOME/perl5${PERL5LIB+:$PERL5LIB}" >> $HOME/.bash_profile
+\curl -L https://install.perlbrew.pl | bash
-echo "source ~/perl5/perlbrew/etc/bashrc" >> $HOME/.bash_profile
-echo 'export ARCHFLAGS="-arch x86_64"' >> $HOME/.bash_profile
-source $HOME/.bash_profile
 </code>
-and for 10.15 and 11 do
+We have to add some variables to the shell environment. Recent macs usually use ''zsh'' as their shell. You can check this with
+<code>
+echo $SHELL
+</code>
+If you use ''bash'', you have to
+  * replace ''.zshrc'' with ''.bashrc'' in the terminal commands below
+  * add <code>if [ -f ~/.bashrc ]; then . ~/.bashrc; fi </code> at the end of the file ''$HOME/.bash_profile'' if it is not already present
+Now add some paths to your Terminal config and reload the config. For an Intel Mac type the following lines in the terminal:
 <code>
 echo "export PERL5LIB=$HOME/perl5/lib/perl5:$HOME/perl5${PERL5LIB+:$PERL5LIB}" >> $HOME/.zshrc
@@ Line 60: / Line 51: @@
 source $HOME/.zshrc
 </code>
+and for a Silicon Mac use
+<code>
+echo "export PERL5LIB=$HOME/perl5/lib/perl5:$HOME/perl5${PERL5LIB+:$PERL5LIB}" >> $HOME/.zshrc
+echo "source ~/perl5/perlbrew/etc/bashrc" >> $HOME/.zshrc
+echo 'export ARCHFLAGS="-arch arm64"' >> $HOME/.zshrc
+source $HOME/.zshrc
+</code>
 ==== Install dependencies with Homebrew ====
-Run the collowing lines in your terminal:
+Run the following lines in your terminal:
 <code>
 brew install gmp
@@ Line 75: / Line 74: @@
 brew install ninja
 brew install ccache
+brew install mongo-c-driver
+brew install jupyterlab
 </code>
@@ Line 84: / Line 85: @@
 cpanm --local-lib=~/perl5 local::lib && eval $(perl -I ~/perl5/lib/perl5/ -Mlocal::lib)
 cpanm SVG
-cpanm Moo
-cpanm ZEFRAM/Module-Runtime-0.013.tar.gz
-cpanm MongoDB
 cpanm JSON
 cpanm install Net::SSLeay
-</code>
-On **10.15** and later do
-<code>
 cpanm Term::ReadLine::Gnu
+cpanm Term::ReadKey
+cpanm XML::SAX
 </code>
-On **10.14** and earlier do
-<code>
-brew link --force readline
-cpanm Term::ReadLine::Gnu
-brew unlink readline
-</code>
-==== Install a python dependence ====
-<code>
-pip3 install jupyter --user
-</code>
-This may complain about a path not beeing set. If so, add this to your $PATH-variable.
 ==== Download polymake ====
@@ Line 115: / Line 97: @@
 You find the sources [[download:start|here]]. Get the source tarball from the Linux section of that page. Download to //Downloads//.
-in the terminal do
+In the terminal do
 <code>
 cd Downloads
-tar -xvfj polymake-4.3.tar.bz2
+tar -xvjf polymake-4.11.tar.bz2
 </code>
 ==== Configure and install polymake ====
-Essentially, polymake is compiled and installed with the following commands. This will put the polymake binary into ''/usr/local''.
+=== Compilation ===
+Essentially, polymake is compiled and installed with the following commands. This will put the polymake binary into ''/usr/local''. You may have to use ''sudo'' for installing.
 <code>
-cd ~/Downloads/polymake-4.3
+cd ~/Downloads/polymake-4.11
 ./configure --without-java
 ninja -C build/Opt -j2 install
 </code>
-However, we recommend to install into a directory in your $HOME-folder, in particular for MacOS 10.15. For this, create a folder with
+However, we recommend to install into a directory in your ''$HOME''-folder. For this, create a folder with
 <code>
 mkdir $HOME/<polymake_install_folder>
@@ Line 138: / Line 122: @@
 <code>
-cd ~/Downloads/polymake-4.3
+cd ~/Downloads/polymake-4.11
 ./configure --without-java --prefix=$HOME/<polymake_install_folder>
 ninja -C build/Opt -j2 install
@@ Line 149: / Line 133: @@
 or add ''$HOME/<polymake_install_folder>/bin/'' to your path.
-==== Full script ====
+=== Configuration ===
+If you use ''Safari'' as your default browser, then you need to switch to another one for polymake. Please do
+<code>
+set_custom $Visual::webbrowser=open -a "Firefox"
+</code>
+inside the polymake shell. Replace ''Firefox'' by ''Google Chrome'' if you prefer this browser.
-[[https://gist.github.com/apaffenholz/a406c3d862f18345c56eddc21907808f|Here]] is also a script that does almost all these steps and allows some configuration.