Differences

This shows you the differences between two versions of the page.

--- user_guide:howto:jupyter [2020/12/17 15:13] – [jupyter] Added usage section lkastner
+++ user_guide:howto:jupyter [2021/06/15 09:02] (current) – [jupyter] Try other browser lkastner
@@ Line 2: / Line 2: @@
 ===== Prerequisites =====
 To use polymake with jupyter it is necessary to have jupyter installed. jupyter is provided via the package manager in many linux distributions.
+  - Ubuntu: ''sudo apt-get install python3-notebook jupyter jupyter-core''
+  - Fedora: ''sudo dnf install python3-jupyter-core''
 Furthermore you need an **installed** version of polymake. This means that you need to run
@@ Line 7: / Line 9: @@
 ninja -C build/Opt install
 </code>
-in your polymake source. Then you use the polymake binary from the folder you installed polymake in.
+if working with the polymake source. Then please use the polymake binary from the folder you installed polymake in.
+If you use a version of polymake installed via your package manager, make sure you have the ''polymake-config'' binary. Try running
+<code>
+polymake-config --version
+</code>
+in a terminal. For example for Ubuntu it is not enough to have the ''polymake'' package installed, you will also need ''libpolymake-dev''.
 ===== Setup =====
@@ Line 54: / Line 62: @@
 ===== Troubleshooting =====
+If the polymake kernel does not start for you, look at the output of jupyter in the terminal and search for any error messages.
+If you experience issues it makes sense to try a different browser.
+==== JuPyMake.PolymakeError: polymake::Main - /usr/lib/polymake/shared is not a symlink ====
+This error sometimes appears with polymake installed by the package manager. It can be fixed by manually setting the symlink
+<code>
+cd /usr/lib/polymake
+sudo ln -s ../../share/polymake shared
+</code>
+==== polymake configuration ====
+The default configuration used by the jupyter kernel is the one in ''$HOME/.polymake''. If you need to reconfigure a rules file, it is easiest to reconfigure it outside of jupyter. Note that the configuration is only saved to ''$HOME/.polymake'' once polymake gets closed using ''exit;''.
+Advance users can use a different configuration folder in the following way:
+<code>
+alias jupymake="env POLYMAKE_USER_DIR=$HOME/.polymake-jupyter jupyter notebook --notebook-dir=$HOME/jupyter-notebooks"
+</code>
 ==== polymake kernel does not start ====